Skip to main content

How to Restart LG TV? Usually LG TVs typically don’t have any faults that require your attention, occasionally. But if you run into troubles try checking the Wi-Fi or settings.

The majority of the time any issue you are having can be resolved by simply restarting or rebooting the TV.  Restarting an LG TV can be done in a variety of ways, both with and without the use of a remote. Here are the few easy method step by step for restarting your LG TV.

What are the Basic steps to take before restarting your LG TV?


LG TV remote controls are designed to be easy to use and navigate. The remote control has a Home button, which can be used to restart the TV. To do this, press and hold the Home button for 10 seconds until the TV turns off. Once it is off, turn it back on using the power button.

1. Ensure that the TV is switched on and connected in.

2. Ensure that the remote control is aimed at the TV and has new batteries in it.

3. Five seconds after pressing and holding the Home button, a message titled “LG TV” appears on the screen.

4. To restart your LG TV, press and release the Home button once again.


How to Restart an LG TV with the Remote?

LG TV remote controls are used to control the TV. A remote control can be used to change channels, adjust volume, turn the TV on and off, and do other things.

Try the steps below

  • To view the Menu, press the Home button on the TV remote.
  • Down a bit, select Settings.
  • Choose General.
  • Select Reset.
  • Up until the final page, listen to the directions displayed on the screen.
  • Select Confirm.
  • Type the TV’s security code.

Now Select Restart.

How to Restart the LG TC without Remote?

The steps below can still be used to restart the TV if your remote is missing or not functioning: The TV’s power button should be held down for 10 seconds. Usually, it’s at the bottom or on the side.

Select the “Menu” using the joystick-like panel controls on your TV. Select the “Settings” option from it.

Select “Confirm” after selecting “Reset” under “General.”

Put in the password for your TV to “Start” the restart procedure.

  • Usually Default password are 0000 or 1234 until unless you changed it.

How to restart the LG TV Without Password?

There is a means for you to reset the TV’s password if you forget the one that was previously established, so don’t worry.

To begin the reset procedure, select and touch the “Reset” option, select “Confirm,” enter the TV’s default pre-set password or default (0000, 1234), and confirm.

Once inside, you can select the reset option by following the same instructions outlined in the preceding question on how to reset a remote device.

To open a menu, press the Home button on your remote control. Alternatively, you can open a settings menu by holding down the Settings button for two to three seconds.

In order to restore the TV to its factory settings, press the Smart button on your remote, choose the gear symbol, go to the General section, and then make your selection.

Click on the Home or Smart button on your remote, choose the Gear icon that appears on your screen, then navigate to General and select Reset to Initial Settings to begin the process of returning the LG TV to its factory default settings.

To begin the recovery procedure, press the Menu button on the LG Smart TV and the Menu button on your remote control at the same time. Hold down the Power button on your TV’s panel for 10 seconds, then release it. LG Smart TV starts resetting, you are done here

Reboot the Operating System

Press the Volume Down button and Power Key together for 12 seconds. You can restart the TV by pressing and holding both volume down and power keys at the same time until it restarts, instead of disconnecting.

If a standard reboot does not work, hold both power and volume down keys together for over seven seconds. Without turning your phone on, hold down both power and volume buttons to start the soft reboot.

Restarting for an Update

For restarting for an update here are some quick steps:

Click on home button >> go to settings >> press on all setting >> click on general menu >> press on ABOUT THIS TV option.

It will show weather your tv have an update or not

Don’t turn off the TV while in the process of updating.


It’s easy to restart your LG TV and won’t cause you any difficulties. With or without a remote control and even without a password, you may restart your TV. We’ve broken down these three approaches into simple stages so you can follow them and succeed.

Frequently asked questions (FAQs):-

How do I perform a factory reset on my TV?

Reconnect the AC power cord while continuing to hold down the Power and Volume Down (-) buttons on the TV (not the remote control). Hold the buttons down while waiting for the erasing screen to display.

What to do if my LG TV freeze?

Volume Down and Power should be pressed and held together until the device restarts. This usually takes 11 to 12 secs. When you see the LG bootup logo, release the keys.

How can I use my LG TV if I don’t have the remote?

You can download the LG ThinQ app, a mouse connected to your TV, or a streaming device to control the features of your LG TV to access settings without a remote.

Does the LG TV have a reset button?

Press the Smart button on your remote, then click the Gear icon in the top right, then General > Reset to Initial Settings.

How You Can Install, Activate, Stream Bally Sports on Roku?

Who Makes Hisense TV?

Who is the Manufacturer Company of TCL TVs?

Is My Ring Doorbell Button Cracked or Replaceable?

How to Activate and Watch NBC on Roku?

How to Watch YouTube Kids on Roku Device / TV?

5 Ways to Fix Samsung TV Error Code 107

10 Best NSFW Anime to Watch in 2022

10 Best Naruto Manga Panels of All Time

Is Taboo Season 2 Cancelled?

Rishabh Rathore

Rishabh is an enthusiastic and profound author, article publisher, and content creator. Aside from writing, he has a great interest in movies, web series, and the cinematic world.

Leave a Reply